Cutter 100

The powerful professional flail mower.

Efficient. Convenient. Agile.

The CUTTER 100 is the professional flail mower by Reform.

Continuously adjustable drive via control panel and mechanical direct belt drive of the flail rotor provide cost-effective

and efficient work.

		Smooth implement switch Quick stop device, stops rotor shaft immediately after the drive is switched off. When the dead man's switch is released, the flail shaft is actively stopped.
		6 mm Y flail knives for trouble free work Robust, large flail housing High throughput and fine chopping of the crop are characteristics of the Cutter 100
		External air intake standard: guarantees undisturbed work also in longer workdays. Fresh air for engine cooling is taken in above the working zone of the flail unit.
		Control panel: electro-hydraulic drive adjustment. The operator can select the travel direction and the speed comfortably with his or her thumb. Fine tuning of the drive speed response for individual adjustment to the operator's preference. 0-button: quick stop of the drive PROFESSIONAL COMBINATION: Cutter 100 with starter motor. Releasing the dead man's switch or simultaneous full pulling of both steering levers stops the Cutter 100 at shortest braking distance (circa 50 cm). IN CONTRAST to the mechanical drive adjustment: The base unit is driven as long as the engine produces a speed for the hydrostat unit. Pushing operation is provided by the standard push unit, this means the engine can pause for quick relocation on level ground! Towing with the optional towing unit.

Finely adjustable hydrostatic steering ensures manoeuvrability in tightest spaces.
Simultaneous full pulling of both steering levers sets the drive on 0 thrust. This feature helps to actively avoid obstacles, stools, etc. to prevent damage to the flail unit.

The robust steering bar is the mounting base for the operating elements.
Perfect shaping of the bar. Curved design wards off branches and thus prevents damage to the controls.
Optional: Hand guards available.
Standard equipment: Bar height and side adjustment. for optimum adjustment to most diverse conditions.
Standard vibration damping of the steering bar facilitates fatigue-free work with the professional flail mower by Reform.