Dealer-Login

You can access the Partner Portal via the button on the right.

Green space maintenance attachments

The Reform Metrac with its lightweight, compact design, slope capability and high manoeuvrability thanks to 4 wheel steering, is particularly suitable for green space maintenance. Equipped with the appropriate attachments, it masters every task.

Flail mower

Using a flail mower is a traditional role for the maintenance of green spaces. Depending on material, different tools are used. These ensure appropriate shredding and distribution of the mowed material and therefore provide for optimum rotting. Thanks to the compact and weight-optimised design of the flail mowers, work is no problem even on steep slopes.

Technical data: 

  • Working widths from 2 to 2.2 m
  • 1 rotor with 16 to 66 tools
  • Weight from 390 kg
  • 3-point linkage Cat. I/II
  • 540 or 1,000 rpm drive

Sickle mower

Sickle mowers are particularly suitable for mowing parks, sports fields, golf courses or green spaces at airports. With the different spindles,the short grass is cut and shredded very cleanly. The sickle mowers are either mechanically driven by the PTO shaft andaV-beltor have a hydraulic system and are operated hydraulically. The mowed material is either evenly distributed again by the sickle mower or extracted into a grass container by an extraction system. With a working width of up to 3.5 m, high acreage performance is guaranteed. The side panels can be folded hydraulically for transport.

Technical data: 

  • Working widths from 2 to 3.5 m
  • Mowing height 20 to 80 mm
  • Mechanical or hydraulic drive
  • Weight from 300 kg
  • 3-point linkage Cat. I/II
  • 540 or 1,000 rpm drive

Extension arm boom flail mower

Extension arm boom flail mowers are ideal for the maintenance of roadside greenery or narrow embankments. A boom with a reach of 3.5 m and a 900 mm wide mulching head means that small surfaces and embankments can be perfectly tilled. In addition, the boom can be equipped with a pruner and can therefore be used for hedge maintenance as well. The extension arm boom flail mower is driven by an on-board hydraulic system driven by a PTO. The boom arm is operated easily and conveniently via a joystick.

Technical data: 

  • Working width 900 mm
  • Boom range 3.5 m (middle of vehicle / middle of mower head)
  • Hydraulic drive via the on-board hydraulic system
  • Weight from 370 kg
  • 3-point linkage Cat. I/II
  • Drive 540 rpm

Side flail mower

The side flail mowers can be mounted on either the front or rear linkage. Located on the side, it is also possible to work easily and safely along trench edges. The side flail mowers are mechanically driven by the PTO and can be swivelled hydraulically. In combination with a front-mounted flail mower, the working width can be increased to up to 4 m, which increases the acreage performance.

Technical data: 

  • Working width 1.25 to 1.8 m
  • Mechanical drive
  • Swivel range + 90° / - 50°
  • Weight from 370 kg
  • 3-point linkage Cat. I/II
  • 540 or 1,000 rpm drive

Twin blade mower

The exceptionally lightweight twin blade mowers are particularly suitable for use with the smaller Metrac models. With a dead weight of 125 kg or more, they are the lightweight alternative to rotary disc mowers. The twin blades ensure clean and gentle cutting of forage.

Technical data: 

  • Working widths from 2 to 2.3 m 
  • Twin-blade drive with freewheel 
  • Weight from 125 kg 
  • 3-point linkage Cat. I and collision protection 
  • Drive 540 rpm 

More about Reform’s twin blade mower >