Mountain agriculture attachments
Reform Metracs are perfectly suited for use in mountain agricultural technology. Thanks to its two attachment areas, a Reform Metrac can be equipped with many different attachments for mountain agricultural.
Rotary disc mower
Modern Alpine rotary disc mowers have a compact design and low weight. The rotary disc mowers excel with a clean cut – even at high speeds. With working widths of up to 3 m, large acreage performance is possible.
Technical data:
- Working widths from 1.9 to 3.04 m
- 4 to 7 mowing discs with 2 blades each
- Weight from 245 kg
- 3-point linkage Cat. I/II
- Drive 540 rpm


Twin blade mower
The exceptionally lightweight twin blade mowers are particularly suitable for use with the smaller Metrac models. With a dead weight of 125 kg or more, they are the lightweight alternative to rotary disc mowers. The twin blades ensure clean and gentle cutting of forage.
Technical data:
- Working widths from 2 to 2.3 m
- Twin-blade drive with freewheel
- Weight from 125 kg
- 3-point linkage Cat. I and collision protection
- Drive 540 rpm
Rotary tedder
The versatile Alpine rotary tedders are indispensable for forage harvesting. Mounted on a Reform Metrac, Muli or Mounty, even steep surfaces can be easily worked by machine. Attached to the 3-point rear linkage, it is easy to manoeuvre even in narrow passages. Depending on the model and operating conditions, 4- or 6-rotary tedders are suitable.
Technical data:
- Working widths from 3 to 6 m
- 4 or 6 rotary harrows
- Weight from 300 kg
- 3-point linkage Cat. I/II
- Drive 540 rpm


Side delivery belt rake
Side delivery belt rakes are ideal for swathing and gathering hay on slopes. Their compact and light-weight design delivers a very low operating weight, so they can be used in virtually all locations. The short mounting and perfect ground adjustment of the Reform angle swing lift delivers the best raking quality and excellent forage protection. Equipped with up to 14 tine arms and working widths from 2.3 to 2.7 m, the side delivery belt rakes can be individually adapted to the Metrac.
Technical data:
- Working widths from 2.3 to 2.7 m
- 13 or 14 tine arms
- 8 or 10 tines per tine arm
- Weight from 235 kg
- 3-point linkage Cat. I
- Drive 540 rpm
Front or rear bucket
With the transport bucket, which can be mounted either on the front or rear hydraulics, the Metrac masters a variety of light transport tasks. Equipped with a liftgate, even bulk goods can be loaded easily.
Technical data:
- Width from 2 m
- Tilting
- 2-cylinder system single-acting
- Weight from 256 kg
- Payload 1,000 kg
- 3-point linkage Cat. I
